The DSC1101CL2-024.7500T is a MEMS-based XO (Standard) oscillator delivering a 24.75 MHz CMOS output — a drop-in clock for MCUs, FPGAs, or Ethernet PHYs that need a clean 24.75 MHz reference. The supply voltage spans 2.25V to 3.6V, covering 2.5V and 3.3V logic rails — no extra regulator needed if the rail sits within that window.
Standby mode and low disable current for battery duty
6-SMD package and board-fit note
Housed in a 6-SMD no-lead package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm — a compact footprint that fits tight layout zones near the processor or PHY. The 6-pad layout is standard for MEMS oscillators in this size class; the standby pin is on pin 1, so the PCB pattern must route it to a GPIO or pull-up if the function is unused.