Supply voltage spans 2.25V to 3.6V — the same part works on a 2.5V or 3.3V rail, so the BOM doesn't need a dedicated regulator for the oscillator.
When active, the oscillator draws 35 mA max at 32 MHz — the MEMS resonator consumes less than a quartz equivalent at this frequency, which matters in a dense board with multiple oscillators.
The 6-SMD no-lead package (3.20mm x 2.50mm footprint, 0.90mm seated height) is a standard MEMS oscillator land pattern — no board layout changes needed if replacing a quartz XO in the same footprint.