Skip to main content
Log in
Microchip Technology DSC1101CI5-008.0000T — Crystals & Oscillators

DSC1101CI5-008.0000T – 8 MHz MEMS XO, CMOS, Standby, Active

MPNDSC1101CI5-008.0000T
Active

Microchip Technology DSC1101 series, XO (Standard), 8 MHz CMOS output, 2.25V ~ 3.6V supply, standby (power-down) function, -40°C ~ 85°C, 6-VDFN package, tape & reel.

Microchip Technology DSC1101CI5-008.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101CI5-008.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency8 MHz
Frequency stability±10ppm
Operating temperature-40°C ~ 85°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN

Product details

The MEMS resonator is sealed inside the package, so you skip the quartz startup time and the sensitivity to vibration that a crystal can bring. Supply voltage spans 2.25V to 3.6V, which means it runs from a 3.3V rail with margin or from a 2.5V logic supply without a separate regulator. The wide range simplifies BOM consolidation across multiple voltage domains.

Industrial temperature and surface-mount footprint

Housed in a 6-VDFN package measuring 3.20mm x 2.50mm with a seated height of 0.90mm — a compact footprint that leaves room for other passives on a dense PCB. The surface-mount pads are hand-solderable with a fine-tip iron if you're prototyping, though reflow is the production path.

Frequently asked questions

What is the frequency and output type of the DSC1101CI5-008.0000T?

It is an 8 MHz oscillator with a CMOS output — a square-wave clock signal that connects directly to the clock input of an MCU, FPGA, or logic device without external level translation.

Does the DSC1101CI5-008.0000T have a standby function?

Yes — the standby (power-down) function stops the oscillator and reduces supply current to 95 µA max. Assert the standby pin to enter low-power mode; de-assert it to resume clock output.