Microchip Technology DSC1101 series, XO (Standard) MEMS oscillator, 125 MHz CMOS output, ±25 ppm frequency stability, 2.25V to 3.6V supply, -40°C to 85°C, 6-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 125 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
The 6-SMD no-lead package (3.20 mm x 2.50 mm footprint, 0.90 mm seated height) is a standard MEMS oscillator land pattern; the same footprint is shared across the DSC1101 family, so a frequency change on the same BOM line swaps in without a board spin.
Yes — the function is Standby (Power Down). When the enable pin is pulled low, the oscillator stops and draws 95 µA max, compared to 35 mA max in normal operation. This allows the system to cut clock power during sleep without a separate load switch.