Skip to main content
Log in
Microchip Technology DSC1101CI1-016.0000T — Crystals & Oscillators

DSC1101CI1-016.0000T – 16 MHz MEMS XO, CMOS, 2.25-3.6V

MPNDSC1101CI1-016.0000T
Active

Microchip DSC1101 series, XO (Standard), 16 MHz, CMOS output, 2.25V ~ 3.6V supply, ±50 ppm stability, -40°C ~ 85°C, 6-SMD no-lead package, tape & reel (TR).

Microchip Technology DSC1101CI1-016.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101CI1-016.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency16 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-SMD, No Lead

Product details

The DSC1101CI1-016.0000T is a 16 MHz MEMS-based oscillator from Microchip's DSC1101 series, delivering a CMOS output with ±50 ppm frequency stability across the full industrial temperature range. Its supply voltage spans 2.25V to 3.6V, covering 2.5V, 3.0V, and 3.3V logic rails without an external regulator — a single BOM line for mixed-voltage designs.

The 6-SMD no-lead package (3.20 mm x 2.50 mm, 0.90 mm seated height) fits tight PCB layouts; the MEMS resonator is inherently more shock- and vibration-tolerant than a quartz crystal in the same footprint.

Active lifecycle and tape & reel delivery

Frequently asked questions

Is DSC1101CI1-016.0000T available in tape and reel?

Yes, the package option is Tape & Reel (TR), ready for automated assembly.

What is the standby current of DSC1101CI1-016.0000T?

The maximum supply current when disabled (standby mode) is 95 µA.

Can DSC1101CI1-016.0000T be replaced by a standard quartz oscillator?

A standard quartz oscillator with the same 16 MHz frequency, CMOS output, 2.25-3.6V supply, and 6-SMD footprint could function as a drop-in replacement, but the MEMS resonator offers better shock/vibration tolerance and typically faster start-up. Verify the enable/disable logic and frequency stability (±50 ppm) against the quartz part's specs before substituting.

Does DSC1101CI1-016.0000T have an alternative part with enable/disable function?

This part already includes a standby (power-down) function that disables the output. Other DSC1101 siblings share the same pinout and enable/disable logic, differing only in frequency or stability grade.