Skip to main content
Log in
Microchip Technology DSC1101CE5-024.5760T — Crystals & Oscillators

DSC1101CE5-024.5760T MEMS XO 24.576 MHz CMOS - Microchip

MPNDSC1101CE5-024.5760T
Active

Microchip Technology DSC1101CE5-024.5760T, XO (Standard) MEMS oscillator, 24.576 MHz, CMOS output, 2.25V–3.6V supply, -20°C to 70°C, 6-VDFN package.

Microchip Technology DSC1101CE5-024.5760T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101CE5-024.5760T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency24.576 MHz
Operating temperature-20°C~70°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN
Absolute pull range±10ppm

Product details

The DSC1101CE5-024.5760T is a MEMS-based XO (Standard) that outputs a 24.576 MHz CMOS clock from a 2.25V to 3.6V supply rail. The CMOS output drives a single-ended load directly.

It belongs inside an office switch, a desktop computer, an audio interface, or a consumer appliance — not in an engine bay, an outdoor base station, or a factory floor panel where ambient temperatures exceed 70°C. The 6-VDFN package (3.20 mm x 2.50 mm, 0.90 mm seated height) is a standard surface-mount footprint. The small body and low profile suit dense PCB layouts where board space is tight.

Frequently asked questions

Where can I buy DSC1101CE5-024.5760T and what is the lead time?

This part is Active and available through independent distribution. We source it per your RFQ — submit your target quantity and we will confirm availability and lead time in the quote. No stock-holding claim is made; every order is confirmed at quote time.

Does DSC1101CE5-024.5760T require external capacitors like a quartz crystal?

No. Because the resonator is a MEMS device inside the package, you do not need external load capacitors. Connect the output pin to the clock input of your IC, power the supply pin, and ground the rest — that is the full BOM for the clock source.

What is the phase jitter of DSC1101CE5-024.5760T?

The evidence does not list a phase jitter specification. For jitter-sensitive applications (e.g., high-speed serial links), check the full datasheet or contact Microchip for the jitter performance data. The ±10 ppm APR gives you the frequency accuracy over temperature and aging, but jitter is a separate parameter.