Skip to main content
Log in
Microchip Technology DSC1101CE5-024.5760 — Crystals & Oscillators

DSC1101CE5-024.5760 XO Oscillator 24.576 MHz CMOS MEMS

MPNDSC1101CE5-024.5760
Active

Microchip Technology DSC1101CE5-024.5760, XO (Standard) MEMS oscillator, 24.576 MHz, CMOS output, ±10 ppm APR, 2.25V–3.6V supply, 6-VDFN package, -20°C to 70°C.

Microchip Technology DSC1101CE5-024.5760 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101CE5-024.5760 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Supply voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency24.576 MHz
Operating temperature-20°C~70°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN
Absolute pull range±10ppm

Product details

MEMS clock source for 24.576 MHz timing

The DSC1101CE5-024.5760 is a MEMS-based XO (Standard) oscillator delivering a 24.576 MHz CMOS output with ±10 ppm absolute pull range. Supply voltage spans 2.25 V to 3.6 V, covering both 2.5 V and 3.3 V rails without a separate regulator.

The DSC1101 series shares the same 6-VDFN package and pinout across frequency variants, so a frequency change within the family does not require a board layout revision.

Standby power-down and disable current

The 35 mA max active current is typical for a 24.576 MHz CMOS oscillator at 3.3 V.

Frequently asked questions

Where to buy DSC1101CE5-024.5760 oscillator online?

Submit an RFQ for this exact Microchip order code.

Is DSC1101CE5-024.5760 compatible with 3.3V supply?

Yes. The supply voltage range is 2.25 V to 3.6 V, so both 3.3 V and 2.5 V rails are within spec. The CMOS output swings rail-to-rail, matching common logic families without level translation.

Does DSC1101CE5-024.5760 have a standby power down feature?

Yes, the function is listed as Standby (Power Down). When enabled, the output is disabled and the supply current drops to 95 µA max, allowing the system to gate the clock during sleep modes.

Can DSC1101CE5-024.5760 be used as a direct replacement for a standard quartz oscillator?

The DSC1101CE5-024.5760 is a MEMS-based XO with CMOS output, so it can replace a standard quartz oscillator of the same frequency, supply voltage, and output type. The 6-VDFN package differs from a typical quartz 4-pad footprint — confirm the land pattern compatibility before substitution.