Skip to main content
Log in
Microchip Technology DSC1101BM2-100.0000T — Crystals & Oscillators

DSC1101BM2-100.0000T MEMS Oscillator – 100 MHz, CMOS

MPNDSC1101BM2-100.0000T
Active

Microchip Technology DSC1101 series, XO (Standard) MEMS oscillator, 100 MHz CMOS output, ±25 ppm stability, 6-SMD no-lead package, -55 to 125°C operating range.

Microchip Technology DSC1101BM2-100.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101BM2-100.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply35mA
Current - supply (Disable)95µA
Frequency100 MHz
Frequency stability±25ppm
Operating temperature-55°C~125°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-SMD, No Lead

Product details

100 MHz MEMS oscillator with full military temperature range

The DSC1101BM2-100.0000T is a MEMS-based XO (Standard) oscillator delivering a 100 MHz CMOS clock output across the full -55°C to 125°C military temperature range — a combination that quartz oscillators struggle to hold without a heater or a ceramic package. Supply voltage spans 2.25 V to 3.6 V, so the same oscillator can feed a 2.5 V FPGA bank and a 3.3 V processor without a level translator — just route the output to both loads and verify the fan-out against the 35 mA max supply current.

Standby power-down and package footprint

The 6-SMD no-lead package measures 5.00 mm x 3.20 mm with a seated height of 0.90 mm — a standard 5x3.2 mm footprint shared by many MEMS and quartz oscillators, so a board layout designed for a SiTime or Epson part can often accept this Microchip device without a respin.

Frequently asked questions

What is the closest pin-compatible alternative to the DSC1101BM2-100.0000T?

Within the Microchip DSC1101 series, any member with the same 6-SMD no-lead package and 5.00 mm x 3.20 mm footprint is pin-compatible — the difference is frequency and stability grade. Outside Microchip, the SiTime SiT8208 series in the same 5x3.2 mm package is a functional equivalent with similar supply voltage and CMOS output, though the temperature range and standby current should be verified against the BOM requirements.

Is the DSC1101BM2-100.0000T RoHS compliant?

The evidence does not list a specific RoHS compliance statement for this order code. Standard Microchip MEMS oscillator products are typically RoHS-compliant and lead-free, but confirm with the datasheet or request a certificate of compliance at quote time.