Microchip DSC1101 series MEMS-based XO (standard oscillator), 100.0000 MHz, CMOS output, ±25 ppm stability, 2.25 V to 3.6 V supply, -55°C to 125°C operating range, 6-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Supply voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 100 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -55°C~125°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
CMOS output at 100 MHz with ±25 ppm frequency stability means it drives standard logic families (LVCMOS, HCMOS) directly — no level translation needed.
The part can be specified for new designs with confidence in ongoing supply.
Yes — the function is Standby (Power Down). When the enable pin is driven low, the output goes high-impedance and supply current drops to 95 µA max. This is useful for power-sensitive designs that can gate the clock when the load is idle.