Skip to main content
Log in
Microchip Technology DSC1101AM2-030.0000 — Crystals & Oscillators

DSC1101AM2-030.0000 MEMS XO, 30 MHz, ±25 ppm, -55°C to 125°C

MPNDSC1101AM2-030.0000
Active

Microchip Technology DSC1101AM2-030.0000, XO (Standard) MEMS oscillator, 30 MHz CMOS output, ±25 ppm stability, 2.25V–3.6V supply, standby (power-down) function, 6-VDFN exposed-pad package, -55°C to 125°C operating range

Microchip Technology DSC1101AM2-030.0000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1101AM2-030.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1101
MountingSurface Mount
Voltage2.25V ~ 3.6V
Current - supply35mA
Frequency30 MHz
Frequency stability±25ppm
Operating temperature-55°C~125°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN Exposed Pad

Product details

30 MHz MEMS XO with military temperature range

The DSC1101AM2-030.0000 is a 30 MHz MEMS-based oscillator from Microchip's DSC1101 series, delivering a CMOS output with ±25 ppm frequency stability across the full -55°C to 125°C military temperature range.

Operating from 2.25V to 3.6V, this oscillator covers the common 2.5V and 3.3V logic rails without a separate regulator — the wide input range absorbs rail ripple from a downstream buck converter.

Housed in a 6-VDFN with exposed pad measuring 7.00 mm x 5.00 mm and a seated height of 0.90 mm, the package footprint matches standard 7x5 mm oscillator land patterns — no layout change from a quartz XO of the same size.

Frequently asked questions

Is DSC1101AM2-030.0000 a direct replacement for a standard quartz oscillator?

Yes, in most cases. The 7x5 mm 6-VDFN package shares the same footprint as common 7x5 mm quartz oscillators, and the CMOS output is electrically compatible. Confirm the pin 1 function — on this part it is standby (power down), not enable/disable — and verify the supply voltage range (2.25V–3.6V) matches your rail.

Does DSC1101AM2-030.0000 have an enable/disable or standby mode?

It has a standby (power-down) function. When the standby pin is asserted, the oscillator stops and supply current drops to near zero. This is not a tristate output — the output goes high-impedance in standby, so downstream logic sees a floating input unless pulled.