Microchip Technology DSC1101AI5-066.0000, XO (Standard) MEMS oscillator, 66 MHz CMOS output, ±10 ppm stability, 2.25V–3.6V supply, -40°C to +85°C, 6-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 66 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead Exposed Pad |
The DSC1101AI5-066.0000: The MEMS resonator gives it better resistance to shock and vibration than a quartz crystal, and the 95 µA max standby current (disable) lets the system cut clock power between active periods without a separate load switch.
Operates from 2.25 V to 3.6 V, covering common logic rails without a separate regulator.
When the Standby (Power Down) function is asserted, the supply current drops to 95 µA maximum. This lets you gate the clock in battery-powered designs without a separate load switch.
Yes — the DSC1101AI5-066.0000 is a MEMS-based oscillator that is footprint- and function-compatible with many standard 6-SMD quartz XOs. The MEMS construction gives better shock/vibration immunity and faster start-up, but the output is standard CMOS and the supply range (2.25 V–3.6 V) covers common logic rails. Verify the pinout and enable logic against your existing quartz part before swapping.