Microchip DSC1101 series, XO (Standard), 60 MHz, CMOS output, MEMS base resonator, 6-VDFN exposed pad, -40 to 85 °C, 2.25-3.6 V supply
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 60 MHz |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN Exposed Pad |
| Absolute pull range | ±10ppm |
Housed in a 6-VDFN with exposed pad, 7.00 mm x 5.00 mm footprint, 0.90 mm seated height — the thermal pad under the package should be soldered to a ground plane for heat sinking and mechanical stability.
Yes.
When the standby pin is asserted, the output is disabled and the supply current drops to 95 µA max — the oscillator stops, saving power. De-asserting the pin restarts the output within the start-up time specified in the datasheet.
The MEMS resonator is less sensitive to vibration and shock than a quartz crystal, and the frequency stability (±10 ppm APR) is maintained across the full -40 to 85 °C range without the aging drift typical of quartz. The trade-off is that the MEMS part draws up to 35 mA, higher than a low-power quartz oscillator.