Microchip DSC1101AI2-150.0000, XO (Standard) MEMS oscillator, 150 MHz CMOS output, ±25 ppm stability, standby (power down) function, -40°C to 85°C, 6-VDFN exposed pad package
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Frequency | 150 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN Exposed Pad |
The 0.50 mm pitch of the VDFN package means the PCB land pattern should follow the manufacturer's recommended footprint to avoid solder bridging during reflow.
Yes, the function is listed as Standby (Power Down). When the enable pin is deasserted, the oscillator stops and draws minimal current, allowing the system to enter a low-power sleep mode.
This is a common industrial-grade tolerance suitable for most Ethernet, FPGA, and processor reference clock applications.
The evidence does not provide a direct cross-reference between the DSC1101 and DSC1001 series. Both are MEMS oscillators in the same package and pinout family, but the DSC1101 series typically offers lower jitter and a wider supply range. Confirm the pinout and function compatibility against the respective datasheets before substituting.