Microchip DSC1101 series XO (Standard), 80 MHz CMOS output MEMS oscillator, ±25 ppm stability, 2.25V–3.6V supply, -40°C to +85°C, 6-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 80 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-SMD, No Lead |
The DSC1101AI2-080.0000T: Supply voltage spans 2.25V to 3.6V, so it runs from either a 2.5V or 3.3V rail without an intermediate regulator — one less part in the power tree.
Housed in a 7.00 mm × 5.00 mm 6-SMD no-lead package, seated height 0.90 mm — the footprint matches standard 7×5 mm oscillator pads, so a layout designed for a quartz XO accepts this MEMS part without a board spin.
The DSC1101AI2-080.0000T is an active Microchip part. Submit an RFQ with your target quantity and lead-time requirement; we source through independent distribution and confirm availability and current pricing at quote time. No stock-holding claim — every order is quoted to your BOM line.
Yes, the function is listed as Standby (Power Down). When enabled, the maximum disable current is 95 µA, which suits battery-powered or duty-cycled applications that need to cut clock power between active periods.
The output is CMOS, a single-ended logic level compatible with most MCU, FPGA, and PHY clock inputs. No level translation is needed when the supply rail matches the receiving device's I/O voltage.