Microchip Technology DSC1101AE1-024.0000, MEMS XO (Standard), 24 MHz CMOS output, 2.25 V to 3.6 V supply, 35 mA max active, 95 µA standby, -20°C to 70°C, 6-VDFN exposed pad.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1101 |
| Mounting | Surface Mount |
| Voltage | 2.25V ~ 3.6V |
| Current - supply | 35mA |
| Current - supply (Disable) | 95µA |
| Frequency | 24 MHz |
| Operating temperature | -20°C~70°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN Exposed Pad |
| Absolute pull range | ±50ppm |
Operating from 2.25 V to 3.6 V, this oscillator covers common 2.5 V and 3.3 V logic rails without a separate regulator.
Housed in a 6-VDFN with exposed pad (7.00 mm x 5.00 mm, 0.90 mm seated height), the device requires a thermal pad on the PCB for heat sinking. The exposed pad also provides a low-inductance ground return, which helps maintain signal integrity on the 24 MHz CMOS output.
Microchip lists the DSC1101AE1-024.0000 as Active.
Yes — as a MEMS-based XO (Standard) with CMOS output, it is a functional drop-in for a 24 MHz crystal oscillator module in the same 7.00 mm x 5.00 mm footprint, provided the supply voltage (2.25-3.6 V) and standby logic match your design. The MEMS resonator eliminates crystal aging and start-up time concerns.
When disabled via the Standby (Power Down) function, the supply current is 95 µA maximum. In active mode, the oscillator draws 35 mA max.