Skip to main content
Log in
Microchip Technology DSC1100BL5-PROGT — Crystals & Oscillators

DSC1100BL5-PROGT Programmable Oscillator – Microchip, 6-VDFN

MPNDSC1100BL5-PROGT
Active

Microchip Technology DSC1100 series, DSC1100BL5-PROGT, blank (user must program) oscillator, 6-VDFN package, 5.00mm x 3.20mm, 0.90mm seated height.

$3.5100Ref. price · indicative, final on quote
Microchip Technology DSC1100BL5-PROGT datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1100BL5-PROGT specifications
ParameterValue
SeriesDSC1100
MountingSurface Mount
Programmable typeBlank (User Must Program)
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
PackageTape & Reel (TR); Cut Tape (CT)
Case6-VDFN

Product details

What this oscillator is — and what it is not

The DSC1100BL5-PROGT is a blank, user-programmable oscillator from Microchip's DSC1100 series — it ships without a factory-set frequency. This means the default frequency is undefined until you program it. If your BOM line expects a fixed-frequency oscillator, this part will not oscillate out of the tube. The 6-VDFN package (5.00mm x 3.20mm, 0.90mm seated height) is a standard MEMS oscillator footprint, compatible with many fixed-frequency oscillators in the same land pattern.

Programming workflow — what you need

Because the part is blank, you need a programming tool — Microchip's TimeFlash or a compatible in-system programmer — to set the output frequency before the oscillator can drive a clock load.

Frequently asked questions

What is the default frequency of the DSC1100BL5-PROGT?

There is no default frequency. The DSC1100BL5-PROGT is a blank (user must program) device — it ships without a programmed output frequency. You must program it using Microchip's programming tools before it will generate a clock signal.

How do I program the DSC1100BL5-PROGT oscillator?

You program it using Microchip's TimeFlash programmer or a compatible in-system programming tool. The part is blank and requires the user to set the desired output frequency before use.

Does the DSC1100BL5-PROGT have a standard footprint compatible with fixed oscillators?

Yes. The 6-VDFN package (5.00mm x 3.20mm, 0.90mm seated height) is a common MEMS oscillator footprint. It is pin-compatible with many fixed-frequency oscillators in the same land pattern, so you can use the same PCB layout.