Microchip DSC1033DI2-025.0000, MEMS-based XO (Standard), 25 MHz, CMOS output, ±25 ppm stability, -40 to +85°C, 3 mA typ, 4-SMD no-lead package, Active.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1033, PureSilicon™ |
| Mounting | Surface Mount |
| Supply voltage | 3.3V |
| Current - supply | 3mA (Typ) |
| Current - supply (Disable) | 1µA |
| Frequency | 25 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C ~ 85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
It draws just 3 mA typical supply current, with a standby mode that drops consumption to 1 µA maximum when the power-down function is asserted.
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm, the DSC1033DI2-025.0000 fits standard MEMS oscillator footprints and requires no special layout treatment beyond the usual decoupling near the supply pin.
The DSC1033DI2-025.0000 is a MEMS-based oscillator with a CMOS output, not a bare crystal. It can serve as a drop-in replacement for a quartz oscillator in the same 4-SMD footprint, provided the supply voltage (3.3 V) and output type (CMOS) match the circuit requirements. The MEMS construction offers better shock and vibration tolerance than quartz.
RoHS compliance is standard for the DSC1033 series from Microchip. Confirm the specific compliance certificate with your order.