Skip to main content
Log in
Microchip Technology DSC1033CI1-002.0480 — Crystals & Oscillators

DSC1033CI1-002.0480 — Microchip MEMS XO, 2.048 MHz, CMOS

MPNDSC1033CI1-002.0480
Obsolete

Microchip Technology DSC1033CI1-002.0480, DSC1033 PureSilicon™ series, XO (Standard) MEMS oscillator, 2.048 MHz, CMOS output, 3.3 V supply, ±50 ppm stability, -40°C to +85°C, 4-SMD no-lead package.

Microchip Technology DSC1033CI1-002.0480 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

DSC1033CI1-002.0480 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1033, PureSilicon™
MountingSurface Mount
Voltage3.3V
Current - supply3mA (Typ)
Current - supply (Disable)1µA
Frequency2.048 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

2.048 MHz MEMS XO — the E1 timing reference

The DSC1033CI1-002.0480 is a MEMS-based XO (Standard) from Microchip's PureSilicon™ series, delivering a 2.048 MHz CMOS output from a 3.3 V supply. That 2.048 MHz is the framing rate — this oscillator was designed into telecom timing modules, T1/ line cards, and base station synchronisation circuits where the frequency tolerance matters more than the absolute accuracy of a crystal.

Standby function — 1 µA power-down current

That is the entire oscillator going to sleep — no output, no internal bias. For a battery-backed line card or a remote sensor node that wakes on a periodic schedule, the 1 µA sleep current extends shelf life without a load switch on the 3.3 V rail.

Microchip has discontinued the DSC1033CI1-002.0480 — the product status is marked Obsolete. For a board that already carries this oscillator, the only path is surplus or independent distribution.

Frequently asked questions

How can I order the DSC1033CI1-002.0480 or check availability?

This part is obsolete. Submit a quote request; we will come back with lot-specific stock and lead time.

Is there a pin-compatible replacement for the DSC1033CI1-002.0480?

Microchip has not published an official successor for this exact order code. A current-production MEMS XO in the same 3.2 x 2.5 mm 4-SMD no-lead package from the DSC11xx or DSC60xx series may be footprint-compatible, but the control logic (standby vs enable) and output drive strength should be checked against the original DSC1033 datasheet before committing a board spin.

What is the frequency stability of the DSC1033CI1-002.0480?

That is the total frequency deviation including initial tolerance, temperature drift, and aging — tight enough for framing without external trimming.