MEMS XO at 2.4576 MHz — 3 mA draw with 1 µA standby
The DSC1033CE2-002.4576T: Typical supply current is 3 mA; the standby (power-down) function drops draw to 1 µA max — the oscillator stops, outputs go high-Z, and the part wakes on reassertion of the enable pin.
Frequency stability is ±25 ppm across the -20°C to 70°C commercial-temperature range — adequate for UART baud-rate generation, low-speed serial clocks, and general-purpose timing in indoor or office equipment. The 3.20 mm × 2.50 mm package (0.90 mm seated height) fits the same footprint as quartz oscillators of the same size; no board respin needed when migrating from a crystal-based clock.
Lifecycle status is Active.