Microchip Technology DSC1033AI1-008.0000, XO (Standard) MEMS oscillator, 8 MHz, CMOS output, 3.3 V supply, ±50 ppm stability, -40°C to 85°C, 4-SMD no-lead exposed pad package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1033, PureSilicon™ |
| Mounting | Surface Mount |
| Supply voltage | 3.3V |
| Current - supply | 3mA (Typ) |
| Current - supply (Disable) | 1µA |
| Frequency | 8 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.276\" L x 0.197\" W (7.00mm x 5.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead Exposed Pad |
At 8 MHz with CMOS output, it directly replaces a standard quartz oscillator on the same footprint and supply rail.
4-SMD no-lead exposed pad, 7.00 mm x 5.00 mm body, 0.90 mm seated height. The exposed pad is not a thermal pad here — it is a mechanical anchor for the MEMS die; reflow profile follows standard lead-free solder for the board.
Submit an RFQ for this active part.
Yes — it is a drop-in replacement for a 3.3 V CMOS quartz oscillator in the same 7 mm x 5 mm 4-pin SMD footprint. The MEMS resonator eliminates quartz start-up jitter and aging drift, but the output type and supply voltage match.
CMOS output, 3.3 V supply. The single-ended CMOS signal is compatible with most MCU and FPGA clock inputs.