Microchip Technology DSC1030BI1-025.0000, DSC1030 PureSilicon™ series, XO (Standard) MEMS oscillator, 25 MHz CMOS output, 3V supply, ±50 ppm stability, -40 to +85°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1030, PureSilicon™ |
| Mounting | Surface Mount |
| Supply voltage | 3V |
| Current - supply | 3mA (Typ) |
| Current - supply (Disable) | 1µA |
| Frequency | 25 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.197\" L x 0.126\" W (5.00mm x 3.20mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Microchip lists the DSC1030BI1-025.0000 as Active. The 4-SMD, No Lead package (5.00 mm × 3.20 mm footprint, 0.90 mm seated height) is a standard MEMS oscillator land pattern shared across the DSC1030 family — board layout re-use is straightforward if you later switch frequency grades within the series.
Active current draw is 3 mA typical at 25 MHz.
Yes — the 'BI1' and 'AI1' suffixes in the DSC1030 family differ only in the frequency-stability grade. The DSC1030BI1-025.0000 specifies ±50 ppm stability, while the 'AI1' variant carries ±25 ppm. Both share the same 5.00 mm × 3.20 mm 4-SMD package, 3V supply, CMOS output, and -40°C to +85°C range. If your design can tolerate ±50 ppm, the BI1 is a drop-in substitute for the AI1 on the same BOM line.