Skip to main content
Log in
Microchip Technology DSC1030BC1-010.0000T — Crystals & Oscillators

DSC1030BC1-010.0000T MEMS Oscillator, 10 MHz, CMOS, Active

MPNDSC1030BC1-010.0000T
Active

Microchip Technology DSC1030BC1-010.0000T, PureSilicon™ MEMS XO, 10 MHz, CMOS output, 3V supply, ±50 ppm stability, 4-SMD no-lead package, active production.

Microchip Technology DSC1030BC1-010.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1030BC1-010.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1030, PureSilicon™
MountingSurface Mount
Voltage3V
Current - supply3mA
Current - supply (Disable)1µA
Frequency10 MHz
Frequency stability±50ppm
Operating temperature0°C~70°C
Size (Dimension)0.197\" L x 0.126\" W (5.00mm x 3.20mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator for clock-tree fit

The DSC1030BC1-010.0000T is a 10 MHz MEMS-based XO (Standard) with CMOS output — a drop-in clock source for digital logic, MCUs, or FPGAs that expect a single-ended 3V CMOS clock.

Power budget and standby mode

Max supply current is 3 mA when active, and drops to 1 µA max in standby (power-down) mode — that standby current is low enough to leave a coin-cell-backed RTC running for years. The Standby (Power Down) function on pin 1 lets the system shut the oscillator off when the clock domain is idle, saving battery in portable or always-on edge devices.

Housed in a 4-SMD, No Lead package measuring 5.00 mm x 3.20 mm with a seated height of 0.90 mm max. The footprint is standard for this class — no via-in-pad or special layout rules.

That means it is available for both new designs and volume replenishment.

Frequently asked questions

Does DSC1030BC1-010.0000T fit a standard 4-SMD footprint?

Yes. The package is 4-SMD, No Lead, 5.00 mm x 3.20 mm body with 0.90 mm max height. This is a common footprint for MEMS and quartz oscillators — no special layout or via-in-pad required.

What is the output type and supply voltage?

CMOS output, 3V supply. The single-ended CMOS signal is compatible with most digital logic families at 3.3V or 3.0V rails — check the input threshold of the receiving device.

Is DSC1030BC1-010.0000T RoHS compliant?

The evidence does not explicitly list RoHS status. Microchip typically marks RoHS compliance on the product label and in the datasheet — verify against the latest datasheet or contact us with your compliance requirement.