The DSC1025BI1-125.0000 is a MEMS-based XO (Standard) oscillator delivering a 125 MHz CMOS output on a 2.5V rail — a clean, low-jitter clock for FPGAs, SoCs, or high-speed serial interfaces that need a fixed-frequency reference without a quartz crystal's startup time.
Standby power-down for battery-conscious builds
Active draw is 10 mA max at 125 MHz, so the standby savings matter most in duty-cycled applications like wireless sensor nodes or handheld instruments.
4-SMD no-lead footprint — hand-solderable with care
The 5.00 mm x 3.20 mm body with 0.90 mm seated height uses a standard 4-SMD, No Lead land pattern — fine for reflow or hot-air rework, and a steady hand with a fine-tip iron can manage it if the pads are pre-tinned.