Skip to main content
Log in
Microchip Technology DSC1018DI1-024.0000T — Crystals & Oscillators

DSC1018DI1-024.0000T MEMS XO — 24 MHz, 1.8V, CMOS, ±50 ppm

MPNDSC1018DI1-024.0000T
Active

Microchip DSC1018DI1-024.0000T, XO (Standard) MEMS oscillator, 24 MHz, CMOS output, 1.8V supply, ±50 ppm stability, -40°C to 85°C, 4-SMD package.

Microchip Technology DSC1018DI1-024.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1018DI1-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1018
MountingSurface Mount
Supply voltage1.8V
Current - supply3mA (Typ)
Current - supply (Disable)1µA
Frequency24 MHz
Frequency stability±50ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

24 MHz MEMS clock source — 1.8V rail, ±50 ppm hold

The DSC1018DI1-024.0000T is a 24 MHz MEMS-based XO (Standard) from Microchip's DSC1018 series, delivering a CMOS output from a 1.8V supply rail.

Standby power-down — 1 µA disable current

For a battery-powered sensor logging data once per minute, the oscillator spends most of its life in this sub-microamp state, extending system run time between charges.

Housed in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm, this oscillator fits tight PCB real estate typical of portable modules, wearables, and compact IoT endpoints. The surface-mount land pattern follows standard 4-pad MEMS oscillator layouts — no via-in-pad or special fan-out required.

Microchip lists the DSC1018DI1-024.0000T as Active.

Frequently asked questions

Is DSC1018DI1-024.0000T compatible with 1.8V only?

Yes — the supply voltage is specified as 1.8V. The oscillator does not support 3.3V or 2.5V rails; the 1.8V supply must be present and stable for the CMOS output to swing correctly.

What is the footprint of DSC1018DI1-024.0000T?

The package is 4-SMD, no lead, with dimensions 2.50 mm x 2.00 mm and a seated height of 0.90 mm. The land pattern is a standard 4-pad layout for MEMS oscillators — no via-in-pad needed.

Does DSC1018DI1-024.0000T have a standby mode?

Yes — the standby (power-down) function disables the output and drops supply current to 1 µA max. Pull the enable pin low to enter standby; high for normal operation.