24 MHz MEMS clock — 1.8V rail, 3 mA draw
The DSC1018BE1-024.0000T is a 24 MHz MEMS-based oscillator from Microchip's DSC1018 series, delivering a CMOS clock output from a 1.8V supply rail. Typical active current is 3 mA, dropping to 1 µA in standby (power-down) mode — a fit for battery-powered or thermally constrained boards where every milliwatt counts. That ±50 ppm window covers the full temperature band — no derating curve to chase — so the 24 MHz clock stays within tolerance for UART baud-rate generation or MCU core timing without external compensation.
Active production — sourced per RFQ
Listed as Active by Microchip.
4-SMD footprint, 5.0 × 3.2 mm
The 5.00 mm × 3.20 mm no-lead package sits 0.90 mm above the board. The 4-pin land pattern is common across many MEMS and quartz oscillators — layout reuse is straightforward if the supply voltage and output type match.