Microchip DSC1004 series, XO (Standard) MEMS oscillator, 10 MHz, CMOS output, ±25 ppm stability, 4-SMD no-lead package, AEC-Q100 qualified.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1004 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.5mA |
| Current - supply (Disable) | 15µA |
| Frequency | 10 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Operating from 1.8V to 3.3V, this oscillator works across common logic rails without an external regulator — useful when the same BOM position must serve 1.8V MCUs and 3.3V FPGAs. Maximum active supply current is 6.5 mA, keeping the thermal footprint small in the 2.50 mm x 2.00 mm 4-SMD no-lead package.
Yes, the standby function disables the output and drops supply current to 15 µA max, allowing the oscillator to be gated off in low-power sleep modes.
Yes, it carries AEC-Q100 rating, making it suitable for automotive applications that require documented reliability testing.
The part is listed as RoHS compliant per Microchip's standard material declaration. Confirm specific exemption requirements at RFQ.