Microchip DSC1004 series XO (Standard) MEMS oscillator, 16 MHz, CMOS output, ±10ppm stability, AEC-Q100, -40°C~85°C, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1004 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.5mA |
| Current - supply (Disable) | 15µA |
| Frequency | 16 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.126\" L x 0.098\" W (3.20mm x 2.50mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
It operates from a 1.8V to 3.3V supply and draws a maximum of 6.5 mA from the rail. The 4-SMD no-lead package (3.20mm x 2.50mm) matches the standard 3225 crystal footprint, so it drops onto existing PCB layouts without a board spin.
The 15 µA max standby current (disable pin active) lets the oscillator sleep during low-power vehicle states without draining the battery.
No. Because this is a MEMS oscillator (not a quartz crystal), the output is a full-rail CMOS signal that does not need external load capacitors for frequency accuracy. The ±10ppm stability is specified without any external tuning components.
Yes — the 3.20mm x 2.50mm 4-SMD no-lead package matches the industry-standard 3225 crystal footprint. It is a direct drop-in replacement for quartz oscillators in that form factor, provided the supply voltage (1.8V to 3.3V) and output type (CMOS) are compatible with the target circuit.