Skip to main content
Log in
Microchip Technology DSC1004CI2-010.0000 — Crystals & Oscillators

DSC1004CI2-010.0000 MEMS Oscillator 10 MHz AEC-Q100

MPNDSC1004CI2-010.0000
Active

Microchip Technology DSC1004CI2-010.0000, XO (Standard) MEMS oscillator, 10 MHz CMOS output, ±25ppm frequency stability, 1.8V to 3.3V supply, -40°C to 85°C, AEC-Q100 qualified, 4-SMD no-lead package.

Microchip Technology DSC1004CI2-010.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1004CI2-010.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1004
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.5mA
Current - supply (Disable)15µA
Frequency10 MHz
Frequency stability±25ppm
Operating temperature-40°C~85°C
Size (Dimension)0.126\" L x 0.098\" W (3.20mm x 2.50mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Supply voltage flexibility and power-down standby

The 1.8V to 3.3V supply range lets one oscillator serve 1.8V, 2.5V, or 3.3V logic domains without a separate voltage rail — simplifies BOM consolidation across mixed-voltage designs. Active current draw is 6.5mA max at full speed — a low-power choice for always-on timing in sensor nodes or CAN transceivers.

Housed in a 4-SMD, No Lead package measuring 3.20mm x 2.50mm with a seated height of 0.90mm — a compact footprint that fits space-constrained PCBs in automotive ECUs or portable instrumentation. Surface-mount assembly with no through-hole leads; the 0.90mm height keeps it low-profile under conformal coating or potting in sealed modules.

Frequently asked questions

What is the frequency of DSC1004CI2-010.0000?

The DSC1004CI2-010.0000 outputs a 10 MHz CMOS clock signal.

Is DSC1004CI2-010.0000 AEC-Q100 qualified?

Yes, it is rated AEC-Q100, making it suitable for automotive applications such as engine control modules, infotainment, and ADAS sensors.

What supply voltage does DSC1004CI2-010.0000 accept?

It operates from 1.8V to 3.3V, covering common logic rails without needing an external regulator.

Can I hand-solder this oscillator?

The 4-SMD, No Lead package (3.20mm x 2.50mm) is hand-solderable with a fine-tip iron and flux — the exposed pads are on the bottom, so pre-tinning the pads and reflowing with a hot-air station is more reliable than drag-soldering.