Skip to main content
Log in
Microchip Technology DSC1004AE1-010.0000T — Crystals & Oscillators

DSC1004AE1-010.0000T – Microchip MEMS XO, 10 MHz CMOS

MPNDSC1004AE1-010.0000T
Active

Microchip Technology DSC1004AE1-010.0000T, XO (Standard), CMOS output, 10 MHz, MEMS base resonator, 1.8 V ~ 3.3 V supply, AEC-Q100 rated, standby function, surface mount 4-VDFN exposed pad package, tape and reel.

Microchip Technology DSC1004AE1-010.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1004AE1-010.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1004
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.5mA
Current - supply (Disable)15µA
Frequency10 MHz
Frequency stability±50ppm
Operating temperature-20°C ~ 70°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-VDFN Exposed Pad

Product details

The DSC1004AE1-010.0000T is a MEMS-based XO delivering a 10 MHz CMOS output from a 1.8 V to 3.3 V supply rail. AEC-Q100 qualification is a hard gate for automotive Tier-1s: this part carries it, so the OEM auditor will accept it without a waiver.

Standby power-down and supply range

For a CAN node or sensor module that sleeps between bus messages, this saves the 6.5 mA active draw without a separate load switch. No external level translation is needed when sharing a rail with a 3.3 V MCU or a 1.8 V FPGA bank.

The part ships in Tape & Reel (TR) packaging, 4-VDFN exposed pad case size 7.00 mm x 5.00 mm.

Frequently asked questions

Is DSC1004AE1-010.0000T AEC-Q100 qualified?

Yes — the DSC1004AE1-010.0000T carries an AEC-Q100 rating. This is the automotive IC qualification standard covering temperature cycle, ESD, latch-up, and PPAP-level documentation. It is suitable for automotive BOMs where a Q100-grade oscillator is required.

Does DSC1004AE1-010.0000T have a standby function?

Yes — the part includes a Standby (Power Down) function. When the enable pin is deasserted, the oscillator stops and the supply current drops to 15 µA max, allowing the clock to be gated during system sleep states.

What is the frequency stability of DSC1004AE1-010.0000T?

The frequency stability is ±50 ppm. This is the total frequency deviation over the operating temperature range and supply voltage variation — suitable for general-purpose clocking in CAN, LIN, and Ethernet PHY applications where tighter ppm is not required.

What is the standby current of DSC1004AE1-010.0000T?

The standby (disable) supply current is 15 µA maximum. This is the current drawn when the standby function is active and the output is disabled.