Microchip Technology DSC1003 series, XO (Standard) oscillator, 100 MHz CMOS output, MEMS base resonator, 4-SMD no-lead package, AEC-Q100 qualified, ±10 ppm stability, -40°C to 105°C operating range.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1003 |
| Mounting | Surface Mount |
| Supply voltage | 1.7V ~ 3.6V |
| Current - supply | 9.6mA |
| Current - supply (Disable) | 15µA |
| Frequency | 100 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1003DL5-100.0000 is a 100 MHz XO (Standard) oscillator built on a MEMS resonator, outputting CMOS levels from a 1.7V to 3.6V supply rail.
Active draw is 9.6 mA max at 100 MHz, which is the current into the oscillator core plus the CMOS output stage driving a typical 15 pF load.
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm — a compact footprint for space-constrained PCBs.
Yes, the function is listed as Standby (Power Down). Pulling the enable pin low disables the output and drops supply current to 15 µA max.
Frequency stability is ±10 ppm across the full temperature and voltage range. No external load capacitors or trim pots needed.