Skip to main content
Log in
Microchip Technology DSC1003DL2-025.0000T — Crystals & Oscillators

DSC1003DL2-025.0000T MEMS Oscillator 25 MHz CMOS AEC-Q100

MPNDSC1003DL2-025.0000T
Active

Microchip DSC1003DL2-025.0000T, XO (Standard), 25 MHz CMOS output, MEMS resonator, AEC-Q100 qualified, -40°C~105°C, 1.7V~3.6V supply, 6 mA max active current, 15 µA standby.

$1.3600Ref. price · indicative, final on quote
Microchip Technology DSC1003DL2-025.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1003DL2-025.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1003
MountingSurface Mount
Supply voltage1.7V ~ 3.6V
Current - supply6mA
Current - supply (Disable)15µA
Frequency25 MHz
Frequency stability±25ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR); Cut Tape (CT)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1003DL2-025.0000T is a 25 MHz MEMS-based XO (Standard) from Microchip, delivering CMOS output across a 1.7V to 3.6V supply range. AEC-Q100 qualified, this oscillator is designed for automotive and industrial applications where temperature extremes and vibration resistance matter — the MEMS resonator inherently withstands shock better than quartz.

Power consumption and standby mode

The standby pin allows the oscillator to be shut down under firmware control, saving power without a separate load switch.

Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm x 0.90 mm, it fits tight PCB layouts common in automotive ECUs and portable equipment.

Frequently asked questions

Is DSC1003DL2-025.0000T obsolete?

No — the product status is Active.

What is the standby current of the DSC1003DL2?

When the standby (power-down) function is active, the maximum disable current is 15 µA. The active supply current is 6 mA max.

Can I use DSC1003DL2 as a drop-in replacement for quartz oscillators?

The DSC1003DL2 is a MEMS-based oscillator with the same 4-SMD, No Lead footprint and CMOS output as many quartz XOs. In most designs it can be a direct replacement, but confirm the supply voltage range (1.7V~3.6V) and frequency stability (±25 ppm) match your existing quartz oscillator's specifications before substituting.