Skip to main content
Log in
Microchip Technology DSC1001DL5-150.0000T — Crystals & Oscillators

DSC1001DL5-150.0000T MEMS Oscillator 150 MHz CMOS AEC-Q100

MPNDSC1001DL5-150.0000T
Active

Microchip Technology DSC1001 series, XO (Standard) MEMS oscillator, 150 MHz CMOS output, ±10 ppm stability, AEC-Q100 qualified, -40°C to 105°C, 4-VDFN package, Tape & Reel.

$2.1300Ref. price · indicative, final on quote
Microchip Technology DSC1001DL5-150.0000T datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DL5-150.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply16.6mA
Current - supply (Disable)15µA
Frequency150 MHz
Frequency stability±10ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-VDFN

Product details

The CMOS output swings rail-to-rail between 1.8V and 3.3V, so the same oscillator can clock a 1.8V FPGA bank and a 3.3V MCU without a level translator.

AEC-Q100 Grade 1 for under-hood and engine-bay duty

It fits engine control units, transmission controllers, and ADAS sensor modules that see 105°C ambient on a hot day. The MEMS construction typically avoids the quartz supply constraints that occasionally pinch crystal-based oscillators.

4-VDFN package and tape-and-reel delivery

The 4-VDFN package measures 2.50 mm x 2.00 mm with a seated height of 0.90 mm — a compact footprint for dense automotive PCBs. Supplied on Tape & Reel (TR), it feeds directly into pick-and-place lines. The surface-mount land pattern follows standard VDFN guidelines; no via-in-pad required for this four-pin part.

Frequently asked questions

Is DSC1001DL5-150.0000T a direct drop-in replacement for a standard 150 MHz quartz oscillator?

Yes, in most cases. The DSC1001DL5-150.0000T is a MEMS-based oscillator with CMOS output, 1.8V to 3.3V supply, and ±10 ppm stability — the same electrical interface as a standard quartz XO. The 4-VDFN package (2.50 mm x 2.00 mm) is a common footprint, but confirm the land pattern matches your existing quartz oscillator's pad layout before committing. The MEMS version typically offers better shock and vibration tolerance and shorter lead times.

Does DSC1001DL5-150.0000T meet AEC-Q100 automotive reliability standards?

Yes. It is rated AEC-Q100, which covers the automotive-grade stress and reliability qualification.