Skip to main content
Log in
Microchip Technology DSC1001DL5-133.3330 — Crystals & Oscillators

DSC1001DL5-133.3330 MEMS XO – 133.333 MHz, CMOS, AEC-Q100

MPNDSC1001DL5-133.3330
Active

Microchip DSC1001 series MEMS XO, 133.333 MHz, CMOS output, ±10 ppm stability, 1.8V–3.3V supply, AEC-Q100, -40°C to 105°C, 4-SMD no-lead package.

$2.1300Ref. price · indicative, final on quote
Microchip Technology DSC1001DL5-133.3330 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DL5-133.3330 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply8.7mA
Current - supply (Disable)15µA
Frequency133.333 MHz
Frequency stability±10ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionEnable/Disable
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DL5-133.3330: AEC-Q100 qualification means this oscillator is screened for automotive-grade reliability – suitable for under-hood ECUs, ADAS sensor fusion modules, and infotainment backbone clocks where a quartz crystal would drift or fail under vibration. Supply voltage spans 1.8V to 3.3V, covering the common digital core and I/O rails without an external regulator.

Tight ±10 ppm stability over temperature

For a 133.333 MHz clock, that translates to a maximum drift of ±1.33 kHz, well within the capture range of most PLL-based receivers.

Frequently asked questions

Is DSC1001DL5-133.3330 AEC-Q100 qualified?

Yes, it carries AEC-Q100 ratings, making it suitable for automotive applications where temperature and reliability screening are required.

Can DSC1001DL5-133.3330 replace a quartz oscillator in an existing design?

Yes – it is a drop-in MEMS replacement for a standard quartz XO with CMOS output, same 4-SMD no-lead footprint. The MEMS resonator offers better shock and vibration immunity than quartz, and the ±10 ppm stability matches or exceeds many quartz parts.