Microchip DSC1001 series MEMS XO, 125 MHz, CMOS output, ±10 ppm stability, AEC-Q100, -40°C to 105°C, 1.8V–3.3V supply, standby (power-down) function, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 125 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Supply voltage spans 1.8V to 3.3V, so the same oscillator can feed a 1.8V FPGA bank and a 3.3V MCU without a second PLL or level translator. The wide range also simplifies inventory—one line item covers multiple rail voltages on the BOM.
This lets a battery-powered ECU or sensor node shut down the main clock without a discrete load switch, saving board space and keeping the sleep current under the microcontroller's own deep-sleep draw.
Yes. The part is rated AEC-Q100, meaning it has passed automotive-grade stress tests including temperature cycling, ESD, and latch-up.
Standby (power-down) is activated by pulling the enable pin low. In this state the output is disabled and the supply current drops to 15 µA max. Releasing the enable pin restarts the oscillator; the output stabilizes within the startup time specified in the datasheet.
Within the same DSC1001 series, any part with the same package (4-SMD, no lead) and pinout is a direct drop-in. The DSC1001 family shares the same footprint and function—only frequency, stability, and temperature grade differ. For a different frequency at the same stability, the base product number DSC1001 covers the full range.