Skip to main content
Log in
Microchip Technology DSC1001DL5-100.0000B — Crystals & Oscillators

DSC1001DL5-100.0000B Microchip 100 MHz MEMS Oscillator

MPNDSC1001DL5-100.0000B
Active

Microchip Technology DSC1001 series, 100 MHz XO (Standard), CMOS output, ±10 ppm stability, -40 to 105 °C, AEC-Q100 qualified, 4-SMD no-lead package, active production.

$2.1300Ref. price · indicative, final on quote
Microchip Technology DSC1001DL5-100.0000B datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DL5-100.0000B specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Voltage1.8V ~ 3.3V
Current - supply8.7mA
Current - supply (Disable)15µA
Frequency100 MHz
Frequency stability±10ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DL5-100.0000B is an active-production 100 MHz MEMS-based XO from Microchip's DSC1001 family, delivering a CMOS output with ±10 ppm frequency stability across the full -40 to 105 °C industrial-automotive temperature range.

That 580:1 ratio means a module that sleeps between CAN wake-ups can leave the oscillator powered without draining the battery. Supply voltage range spans 1.8 V to 3.3 V, so the same BOM line works across a 3.3 V main rail or a 1.8 V core rail without a level translator on the output.

Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The 0.098" x 0.079" footprint is the same as many quartz oscillators in the 2.5x2.0 mm form factor, so it can drop into an existing layout without a board spin. Supplied on Tape & Reel — no MSL concerns; the MEMS resonator is inherently moisture-insensitive, so no bake step before reflow.

Frequently asked questions

Is DSC1001DL5-100.0000B a direct replacement for a 100 MHz crystal oscillator?

Yes — functionally it replaces a 100 MHz quartz crystal plus its load capacitors and inverter, but the package is a 4-pin SMD no-lead rather than a two-pin crystal. The MEMS XO outputs a full-swing CMOS clock directly, so no external feedback circuit is needed. Verify the pinout matches your oscillator footprint — most 2.5x2.0 mm XOs share the same pad layout.