Skip to main content
Log in
Microchip Technology DSC1001DL2-150.0000T — Crystals & Oscillators

DSC1001DL2-150.0000T MEMS XO 150 MHz CMOS ±25 ppm AEC-Q100

MPNDSC1001DL2-150.0000T
Active

Microchip DSC1001DL2-150.0000T XO (Standard), MEMS-based, 150 MHz CMOS output, ±25 ppm stability, 1.8V–3.3V supply, AEC-Q100, -40°C to 105°C, 4-SMD no-lead package.

$1.1550Ref. price · indicative, final on quote
Microchip Technology DSC1001DL2-150.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DL2-150.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply12.2mA
Current - supply (Disable)15µA
Frequency150 MHz
Frequency stability±25ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

MEMS oscillator at 150 MHz for harsh environments

The DSC1001DL2-150.0000T is a MEMS-based XO (Standard) from Microchip's DSC1001 series, delivering a 150 MHz CMOS output with ±25 ppm frequency stability.

Maximum supply current is 12.2 mA when active — negligible for most power budgets.

Housed in a 4-SMD, no-lead package measuring 2.50 mm × 2.00 mm with a seated height of 0.90 mm. The small footprint saves board space in dense designs — a typical 4-layer PCB can route the output trace on an inner layer with a ground plane underneath to control the 150 MHz edge rate. Surface-mount assembly on standard reflow profiles; the MEMS die is encapsulated, so no special handling beyond normal ESD precautions.

Frequently asked questions

How can I order the DSC1001DL2-150.0000T or check current availability?

This part is active and available through independent distribution. No stock-holding claim is made here — availability is verified per inquiry.

Is the DSC1001DL2-150.0000T AEC-Q100 qualified?

Yes, it carries an AEC-Q100 rating. This means it passed automotive-grade reliability testing including temperature cycling, ESD, and latch-up, making it suitable for under-hood or chassis-domain applications.

Can the DSC1001DL2-150.0000T replace a 150 MHz crystal oscillator?

Yes, it is a drop-in replacement for a 150 MHz crystal oscillator in terms of frequency and output type (CMOS,). However, it is a MEMS-based XO, not a quartz crystal — the MEMS resonator has different phase-noise characteristics and better shock tolerance. The pinout is standard 4-pad no-lead; verify the footprint matches your board layout before committing.

What is the closest pin-compatible alternative to the DSC1001DL2-150.0000T?

Within the DSC1001 series, other frequency variants share the same package and pinout. For a 150 MHz XO, the DSC1001DL2-150.0000T is the current production part; no direct pin-compatible second source from another manufacturer is documented. If you need a different stability grade or voltage range, Microchip offers other DSC1001 ordering codes with the same footprint.