Microchip Technology DSC1001DL2-100.0000, XO (Standard) MEMS oscillator, 100 MHz CMOS output, ±25 ppm stability, -40°C to 105°C, AEC-Q100 qualified, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 8.7mA |
| Current - supply (Disable) | 15µA |
| Frequency | 100 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The 1.8V to 3.3V supply range covers common digital rails, so a single BOM line can serve 1.8V FPGA banks, 2.5V PHY references, and 3.3V microcontroller clocks without a level translator.
Active current is 8.7 mA max at 100 MHz — low enough that a standard 2-layer PCB with a 0.1 µF decoupling cap per supply pin handles the transient without a dedicated power plane.
No last-time-buy window or successor part has been announced.
Yes, it carries an AEC-Q100 rating, which qualifies it for automotive-grade applications including under-hood and cabin environments.
When the standby (power down) function is enabled, the maximum supply current is 15 µA.