Skip to main content
Log in
Microchip Technology DSC1001DL2-030.0000 — Crystals & Oscillators

DSC1001DL2-030.0000 MEMS XO 30 MHz CMOS AEC-Q100 - Microchip

MPNDSC1001DL2-030.0000
Active

Microchip DSC1001 Series, XO (Standard) MEMS oscillator, 30 MHz, CMOS output, ±25ppm stability, 1.8V~3.3V supply, 4-SMD no-lead package, AEC-Q100 rated, -40°C~105°C.

$1.0200Ref. price · indicative, final on quote
Microchip Technology DSC1001DL2-030.0000 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DL2-030.0000 specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply7.2mA
Current - supply (Disable)15µA
Frequency30 MHz
Frequency stability±25ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTube
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DL2-030.0000 is a 30 MHz MEMS-based XO (Standard) oscillator from Microchip's DSC1001 series, delivering a CMOS output in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm.

Supply range and frequency stability

Operating from a 1.8 V to 3.3 V supply rail, this oscillator works across common logic voltages without an external regulator — a single part covers 1.8 V, 2.5 V, and 3.3 V domains. Frequency stability is ±25 ppm, tight enough for CAN, LIN, and basic Ethernet clocking in automotive ECUs where the reference must stay within a few tens of ppm over temperature.

Frequently asked questions

Does DSC1001DL2-030.0000 have a standby mode pin?

Yes, the function is listed as Standby (Power Down). When enabled, the supply current drops to 15 µA max, allowing the oscillator to be gated off in low-power system states without removing the supply rail.