Microchip Technology DSC1001DL2-013.5600, XO (Standard) MEMS oscillator, 13.56 MHz, CMOS output, ±25ppm stability, -40°C to +105°C, AEC-Q100 qualified, 4-SMD package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 13.56 MHz |
| Frequency stability | ±25ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC1001DL2-013.5600 is a MEMS-based XO (Standard) oscillator from Microchip's DSC1001 series, delivering a 13.56 MHz CMOS output with ±25ppm frequency stability.
Runs on a 1.8V to 3.3V supply rail, so it drops into existing 1.8V or 3.3V clock trees without a level shifter. Active current draw is 6.3mA max at full speed, keeping the thermal budget low in the 2.50mm x 2.00mm 4-SMD package.
Yes, the DSC1001DL2-013.5600 carries AEC-Q100 qualification, meaning it has passed automotive-grade reliability stress tests including temperature cycling, ESD, and latch-up. This qualifies it for use in under-hood and cabin electronics where the ambient temperature reaches 105°C.
This is tight enough for CAN, LIN, and 100BASE-T1 Ethernet clocking without external trimming.