Skip to main content
Log in
Microchip Technology DSC1001DL1-024.0000T — Crystals & Oscillators

DSC1001DL1-024.0000T – Microchip MEMS XO, 24MHz, AEC-Q100

MPNDSC1001DL1-024.0000T
Active

Microchip Technology DSC1001 series, XO (Standard) MEMS oscillator, 24 MHz, CMOS output, AEC-Q100 qualified, -40°C to 105°C, 1.8V to 3.3V supply, 4-SMD no-lead package.

Microchip Technology DSC1001DL1-024.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DL1-024.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency24 MHz
Frequency stability±50ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DL1-024.0000T is a 24 MHz MEMS-based oscillator from Microchip's DSC1001 series, delivering a CMOS output from a 1.8V to 3.3V supply rail.

Standby mode and supply current

This matters for battery-backed or always-powered automotive modules — the oscillator can be gated off when the system sleeps without draining the backup cell.

Package and footprint for reflow

Housed in a 4-SMD no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm, this part places on a standard 4-pad land pattern. The small footprint and 0.50 mm pitch are pick-and-place friendly, but check the MSL before the oven — MEMS oscillators are moisture-sensitive and need a bake if the floor life has been exceeded.

Frequently asked questions

Is the DSC1001DL1-024.0000T AEC-Q100 certified?

Yes, the DSC1001DL1-024.0000T carries an AEC-Q100 rating, which qualifies it for automotive applications including under-hood and cabin electronics.

Does the DSC1001DL1-024.0000T have a standby or power-down mode?

Yes, the standby (power-down) function disables the output and drops the supply current to 15 µA max, allowing the oscillator to be gated off during system sleep without draining the battery.