The DSC1001DL1-010.0000T is a 10 MHz XO (Standard) built around a MEMS resonator rather than a quartz crystal — the MEMS die is sealed at the wafer level, which gives it better shock and vibration immunity than a quartz can. That puts it in the same reliability class as the rest of an automotive ECU's silicon. The supply voltage range is 1.8 V to 3.3 V, which covers the common logic families without a separate oscillator supply.
Temperature range and current draw
The 105°C ceiling gives margin for self-heating inside a sealed module on a hot engine bay. Max supply current is 6.3 mA, and when the Standby (Power Down) function is active the disable current drops to 15 µA. That 15 µA sleep current is low enough to leave the oscillator powered from a battery-backed rail without draining it during vehicle-off periods.
The 4-SMD, No Lead package measures 2.50 mm x 2.00 mm with a seated height of 0.90 mm. That is a standard 2.0 x 2.5 mm oscillator footprint — the same pad layout used by many quartz and MEMS oscillators in this form factor. The small size and low profile suit space-constrained PCBs like telematics control units or camera modules.