Microchip Technology DSC1001 series, XO (Standard) MEMS oscillator, 10 MHz CMOS output, ±50ppm stability, 1.8V~3.3V supply, -40°C~105°C, AEC-Q100, 4-SMD No Lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 10 MHz |
| Frequency stability | ±50ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Supply voltage spans 1.8V to 3.3V, so the same part can serve a 1.8V FPGA bank or a 3.3V microcontroller without a separate level translator.
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The 0.098" x 0.079" footprint is a standard 4-pin oscillator land pattern; no via-in-pad or special fan-out is required for this two-layer-compatible package.
Yes. The supply voltage range is 1.8V to 3.3V, so it runs directly from a 1.8V rail without an external regulator. The CMOS output levels track the supply voltage.
The MEMS resonator is inherently more resistant to shock and vibration than a quartz crystal, and startup time is typically faster. The frequency stability is ±50ppm, comparable to a standard quartz XO. The AEC-Q100 qualification covers the reliability stress tests automotive designs require.
The package is 4-SMD, No Lead, 2.50 mm x 2.00 mm body, 0.90 mm seated height. The land pattern matches the common 4-pin oscillator footprint used across the DSC1001 series.