Skip to main content
Log in
Microchip Technology DSC1001DL1-005.0196T — Crystals & Oscillators

DSC1001DL1-005.0196T MEMS XO – 5.0196 MHz, AEC-Q100, CMOS

MPNDSC1001DL1-005.0196T
Active

Microchip DSC1001DL1-005.0196T, XO (Standard), 5.0196 MHz, CMOS output, ±50 ppm stability, -40°C to 105°C, AEC-Q100, 4-SMD package, standby function

Microchip Technology DSC1001DL1-005.0196T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DL1-005.0196T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply6.3mA
Current - supply (Disable)15µA
Frequency5.0196 MHz
Frequency stability±50ppm
Operating temperature-40°C~105°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

The DSC1001DL1-005.0196T is a 5.0196 MHz MEMS-based XO from Microchip's DSC1001 series, delivering a CMOS output with ±50 ppm frequency stability across its full -40°C to 105°C range.

Supply voltage tolerance and power budget

Maximum active current is 6.3 mA at 5.0196 MHz; the standby current floor of 15 µA means a vehicle module parked on the CAN bus draws negligible power from the always-on battery.

Housed in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm, the DSC1001DL1-005.0196T fits the same land pattern as standard 2.5 x 2.0 mm crystal oscillators — no layout change required when migrating from a quartz XO.

Frequently asked questions

Is DSC1001DL1-005.0196T AEC-Q100 qualified?

Yes, it carries an AEC-Q100 rating, meaning it meets the automotive reliability stress and PPAP requirements for production use.

What does the standby (power-down) function do on the DSC1001DL1?

When the standby pin is asserted, the oscillator stops and draws 15 µA max from the supply, letting the clock be gated off during system sleep without an external load switch.

Can the DSC1001DL1-005.0196T replace a standard quartz crystal oscillator?

Yes, the 4-SMD footprint is compatible with common 2.5 x 2.0 mm quartz XO land patterns, and the CMOS output drives the same load. The MEMS resonator provides faster start-up and better shock/vibration tolerance than quartz, but the electrical interface is a drop-in replacement.