Microchip Technology DSC1001DI5-150.0000, XO (Standard) MEMS oscillator, 150 MHz CMOS output, ±10 ppm frequency stability, -40°C to 85°C, AEC-Q100 qualified, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 12.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 150 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The supply voltage accepts 1.8 V to 3.3 V, covering the common digital rails without an external regulator — the 12.2 mA max active current at 150 MHz is the full-swing draw, while the Standby (Power Down) function drops the supply current to 15 µA max, letting a module keep the oscillator on the rail and gate the clock at the enable pin rather than switching the power supply.
That stability includes the effects of temperature, supply voltage variation, and aging, so the 150 MHz clock stays within ±1.5 kHz of centre frequency over the full industrial band.
Yes, the part carries an AEC-Q100 rating, which qualifies it for automotive applications requiring the Grade 1 or Grade 2 temperature range and the associated reliability stress tests (temperature cycling, ESD, latch-up, and early-life failure rate). This qualification supports PPAP submission for automotive OEMs.