33.333 MHz MEMS XO with AEC-Q100 qualification
AEC-Q100 rated — this part is qualified for automotive under-hood and cabin applications where vibration and temperature cycling are routine. Operates from a 1.8V to 3.3V supply, so it drops into 2.5V or 3.3V clock trees without a separate regulator.
Active production, no end-of-life pressure
Listed as Active — no last-time-buy window to manage; the part is available for both new designs and ongoing production. The MEMS base resonator eliminates quartz supply constraints and crystal aging drift, which simplifies long-term BOM risk.
Standby function and power budget
A Standby (Power Down) pin drops the supply current to 15 µA max, letting the system gate the oscillator without a separate enable switch. Active draw is 7.2 mA max at 33.333 MHz — low enough for battery-backed modules where every milliampere counts.
Compact 2.5 mm × 2.0 mm footprint
Housed in a 4-SMD, no-lead package measuring 2.50 mm × 2.00 mm with a seated height of 0.90 mm — fits tight layouts in automotive ECUs or portable instrumentation. Surface-mount assembly; the small footprint demands careful solder-paste stencil design to avoid bridging on the four pads.