Skip to main content
Log in
Microchip Technology DSC1001DI5-032.0000T — Crystals & Oscillators

DSC1001DI5-032.0000T MEMS XO – 32 MHz, AEC-Q100, CMOS Output

MPNDSC1001DI5-032.0000T
Active

Microchip Technology DSC1001DI5-032.0000T, XO (Standard) MEMS oscillator, 32 MHz, CMOS output, ±10 ppm stability, 1.8V–3.3V supply, AEC-Q100 qualified, -40°C to 85°C, 4-SMD no-lead package.

Microchip Technology DSC1001DI5-032.0000T datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1001DI5-032.0000T specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1001
MountingSurface Mount
Supply voltage1.8V ~ 3.3V
Current - supply7.2mA
Current - supply (Disable)15µA
Frequency32 MHz
Frequency stability±10ppm
Operating temperature-40°C~85°C
Size (Dimension)0.098\" L x 0.079\" W (2.50mm x 2.00mm)
Height - seated0.035\" (0.90mm)
OutputCMOS
PackageTape & Reel (TR)
RatingsAEC-Q100
FunctionStandby (Power Down)
Base resonatorMEMS
Case4-SMD, No Lead

Product details

Automotive-grade MEMS timing for 32 MHz clock trees

Standby function and current budget for battery-backed systems

For a telematics unit or sensor module that spends most of its life asleep, this standby current is below the self-discharge of a small coin cell, so the clock tree can remain powered without draining the backup battery.

Package footprint and board-level fit

Housed in a 4-SMD, no-lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm.

The DSC1001 series is Microchip's mainstream MEMS oscillator family, so production continuity is expected for the foreseeable future.

Frequently asked questions

Is the DSC1001DI5-032.0000T AEC-Q100 qualified?

Yes, it carries AEC-Q100 qualification, which covers the automotive-grade reliability stress tests — temperature cycling, ESD, latch-up, and extended life. This makes it suitable for under-hood and cabin electronics where a standard commercial oscillator would not be accepted.

What supply voltage range does the DSC1001DI5-032.0000T accept?

The supply voltage range is 1.8V to 3.3V. This covers the common core and I/O rails for automotive MCUs, FPGAs, and SoCs, so you can power it from the same rail as the processor without an extra regulator.

What is the output logic type of the DSC1001DI5-032.0000T?

The output is CMOS, which drives standard digital inputs directly. No external level translator or pull-up resistor is needed when interfacing with most MCU clock inputs.

Does the DSC1001DI5-032.0000T have a standby or power-down function?

Yes, it includes a standby (power-down) function. When enabled, the supply current drops from 7.2 mA max to 15 µA max, allowing the system to shut down the clock tree while keeping the oscillator powered for a fast wake-up.