AEC-Q100 qualified MEMS oscillator for automotive timing
The DSC1001DI5-030.0000: AEC-Q100 qualification means this oscillator has passed the automotive-grade reliability stress tests — temperature cycling, ESD, and latch-up — required for under-hood and cabin-domain ECUs. The MEMS resonator is inherently more shock- and vibration-tolerant than a quartz crystal, which matters on the engine block or in a transmission control module.
Standby power-down and supply flexibility
A dedicated Standby (Power Down) function drops the supply current to 15 µA max when the enable pin is pulled low — useful for battery-backed modules that must preserve the rail during sleep.
Package and board-fit note
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm. The pads require a standard SMD footprint — a two-layer PCB with ground plane under the package is sufficient for most designs.
The DSC1001 series is in volume production, so new designs can commit to this order code without a last-time-buy window. Sourced through independent distribution; quoted to order against the BOM quantity.