Microchip Technology DSC1001DI5-027.0000T, XO (Standard) MEMS oscillator, 27 MHz, CMOS output, ±10 ppm stability, AEC-Q100, -40°C to 85°C, 1.8V–3.3V supply, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 7.2mA |
| Current - supply (Disable) | 15µA |
| Frequency | 27 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tape & Reel (TR) |
| Ratings | AEC-Q100 |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
Operates from a single 1.8V to 3.3V supply rail, covering common logic voltage domains without an external regulator — a single BOM line serves 1.8V, 2.5V, or 3.3V designs.
Housed in a 4-SMD, No Lead package measuring 2.50 mm x 2.00 mm with a seated height of 0.90 mm max — a compact footprint that fits dense PCB layouts without requiring via-in-pad or special fan-out.
When the standby pin is asserted, the oscillator enters a power-down state drawing 15 µA max (disable current) versus 7.2 mA max during active operation. The output is disabled, reducing system power consumption in sleep or idle modes.
The oscillator operates from a single supply between 1.8V and 3.3V, covering 1.8V, 2.5V, and 3.3V logic rails without needing an external voltage regulator.
Yes, the DSC1001DI5-027.0000T is a MEMS-based XO that outputs a CMOS clock signal at 27 MHz. It is a drop-in replacement for a standard quartz crystal oscillator in the same 4-SMD package, with the added benefit of better shock and vibration tolerance from the MEMS resonator.