Microchip DSC1001DI5-024.5760, XO (Standard) MEMS oscillator, 24.576 MHz CMOS output, ±10 ppm stability, -40°C to 85°C, AEC-Q100, 4-SMD no-lead package.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1001 |
| Mounting | Surface Mount |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 6.3mA |
| Current - supply (Disable) | 15µA |
| Frequency | 24.576 MHz |
| Frequency stability | ±10ppm |
| Operating temperature | -40°C~85°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Enable/Disable |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The 4-SMD, no-lead package (2.50 mm x 2.00 mm, 0.90 mm seated height) is a direct drop-in footprint for standard quartz oscillators — no PCB layout change required.
Supply voltage range of 1.8V to 3.3V lets the same oscillator serve 1.8V-core FPGAs, 3.3V microcontrollers, or 2.5V Ethernet PHYs without a separate regulator.
Yes. The 4-SMD, no-lead package (2.50 mm x 2.00 mm) and standard pinout are footprint-compatible with most quartz oscillators in the same package size. The enable/disable function on pin 1 matches the common quartz oscillator control pin.
The DSC1001 series offers ±10 ppm frequency stability, while the DSC1002 series typically offers ±25 ppm. Both share the same package and pinout, so the DSC1001 is the tighter-stability option for precision timing applications.