AEC-Q100 qualification means it passed the same reliability stress tests as the rest of the electronics on the board, so you can drop it into a CAN transceiver clock or an MCU main oscillator without a separate crystal qualification cycle.
Supply voltage and standby — one part covers three rails
Runs on any rail from 1.8V to 3.3V — the same order code serves a 1.8V MCU core clock, a 2.5V FPGA reference, or a 3.3V Ethernet PHY.
Temperature range and frequency stability
For a 24 MHz clock, ±10 ppm is 240 Hz of absolute error worst-case, well within the tolerance of a typical MCU PLL or USB full-speed oscillator.
4-SMD no-lead package, 2.50 mm x 2.00 mm, seated height 0.90 mm max. Standard 4-pin footprint — no special via-in-pad or thermal pad required.